31 Jul
2012
31 Jul
'12
11:01 a.m.
We are looking for a pre-configured 2010 Census Geodatabase with both linework and data
attached for at least the state of Indiana, if not also including the surrounding states.
Although all of the data can be downloaded from the Census Bureau on an as needed basis,
we would like a more permanent copy in-house for our GIS needs and publication to our
regional GIS website.
We are hoping to find something pre-built, rather then downloading and compiling
everything ourselves. Any assistance in the endeavor is appreciated.
John-Paul Hopman
Michiana Area Council of Gov'ts
1 Aug
1 Aug
12:39 p.m.
I've written python scripts to process and load ACS data into a PostGIS database, and
know someone who has done similar for the SF1 data. I've been planning on cleaning up
my python for the ACS and make it available under an open source license (probably Apache
2). I'll see if my colleagues who did the SF1 load (and then shared it with me) are
willing to do the same.
Nate
Nathaniel (Nate) Roth
GIS Programmer
Information Center for the Environment
Department of Environmental Science & Policy
University of California, Davis
1 Shields Ave
Davis, CA 95616
neroth@ucdavis.edu<mailto:neroth@ucdavis.edu>
530-754-6212
From: John-Paul Hopman [mailto:jhopman@macog.com]
Sent: Tuesday, July 31, 2012 12:18 PM
To: CTPP News
Subject: Re: [CTPP] Regional and Statewide Census Geodatabases
We have been referred to the demographic profile geodatabases before and made need to take
a second look. However we were hoping to keep everything in a single central geodatabase,
if one already existed, preferably with more then just the basic demographic tables.
Thank-you for the feedback and links though.
John-Paul Hopman
> Geography Division, Census Bureau released
TIGER/Line shapefiles and
> geodatabase files with linework and 2010 Census demographic profile data.
> See our TIGER Products page at http://www.census.gov/geo/www/tiger/ and
> specifically http://www.census.gov/geo/www/tiger/tgrshp2010/2010DP1.html
>
> ______________________________________
> Michael R. Ratcliffe
> Assistant Division Chief, Geocartographic Products and Criteria
> Geography Division
> U.S. Census Bureau
> 4600 Silver Hill Road/ MS-7400
> Washington, DC 20233-7400
> 301-763-8977
> michael.r.ratcliffe@census.gov<mailto:michael.r.ratcliffe@census.gov>
>
> -----ctpp-news-bounces@chrispy.net<mailto:-----ctpp-news-bounces@chrispy.net>
wrote: -----
> To: CTPP News <ctpp-news@chrispy.net<mailto:ctpp-news@chrispy.net>>
> From: John-Paul Hopman
> Sent by: ctpp-news-bounces@chrispy.net<mailto:ctpp-news-bounces@chrispy.net>
> Date: 07/31/2012 12:18PM
> Subject: [CTPP] Regional and Statewide Census Geodatabases
>
> We are looking for a pre-configured 2010 Census Geodatabase with both
> linework and data attached for at least the state of Indiana, if not also
> including the surrounding states. Although all of the data can be
> downloaded from the Census Bureau on an as needed basis, we would like a
> more permanent copy in-house for our GIS needs and publication to our
> regional GIS website.
>
> We are hoping to find something pre-built, rather then downloading and
> compiling everything ourselves. Any assistance in the endeavor is
> appreciated.
>
> John-Paul Hopman
> Michiana Area Council of Gov'ts
>
> _______________________________________________
> ctpp-news mailing list
> ctpp-news@ryoko.chrispy.net<mailto:ctpp-news@ryoko.chrispy.net>
> http://ryoko.chrispy.net/mailman/listinfo/ctpp-news
>
> _______________________________________________
> ctpp-news mailing list
> ctpp-news@ryoko.chrispy.net<mailto:ctpp-news@ryoko.chrispy.net>
> http://ryoko.chrispy.net/mailman/listinfo/ctpp-news
3 Aug
3 Aug
8:50 a.m.
That would be fantastic.
Mike Baker
GIS/Planner
Erie County Department of Planning
Erie County Courthouse, Room 111
140 West 6th Street | Erie, PA 16501
P (814) 451-6017 | F (814) 451-7000
From: ctpp-news-bounces(a)chrispy.net [mailto:ctpp-news-bounces@chrispy.net]
On Behalf Of Roth, Nate
Sent: Wednesday, August 01, 2012 1:40 PM
To: ctpp-news(a)ryoko.chrispy.net
Subject: Re: [CTPP] Regional and Statewide Census Geodatabases
I've written python scripts to process and load ACS data into a PostGIS
database, and know someone who has done similar for the SF1 data. I've been
planning on cleaning up my python for the ACS and make it available under an
open source license (probably Apache 2). I'll see if my colleagues who did
the SF1 load (and then shared it with me) are willing to do the same.
Nate
Nathaniel (Nate) Roth
GIS Programmer
Information Center for the Environment
Department of Environmental Science & Policy
University of California, Davis
1 Shields Ave
Davis, CA 95616
neroth(a)ucdavis.edu
530-754-6212
From: John-Paul Hopman [mailto:jhopman@macog.com]
Sent: Tuesday, July 31, 2012 12:18 PM
To: CTPP News
Subject: Re: [CTPP] Regional and Statewide Census Geodatabases
We have been referred to the demographic profile geodatabases before and
made need to take a second look. However we were hoping to keep everything
in a single central geodatabase, if one already existed, preferably with
more then just the basic demographic tables.
Thank-you for the feedback and links though.
John-Paul Hopman
> Geography Division, Census Bureau released
TIGER/Line shapefiles and
> geodatabase files with linework and 2010 Census demographic profile
data.
> See our TIGER Products page at
<http://www.census.gov/geo/www/tiger/>
http://www.census.gov/geo/www/tiger/
and
> specifically
<http://www.census.gov/geo/www/tiger/tgrshp2010/2010DP1.html>
http://www.census.gov/geo/www/tiger/tgrshp2010/2010DP1.html
>
> ______________________________________
> Michael R. Ratcliffe
> Assistant Division Chief, Geocartographic Products and Criteria
> Geography Division
> U.S. Census Bureau
> 4600 Silver Hill Road/ MS-7400
> Washington, DC 20233-7400
> 301-763-8977
> <mailto:michael.r.ratcliffe@census.gov> michael.r.ratcliffe(a)census.gov
>
> <mailto:-----ctpp-news-bounces@chrispy.net>
-----ctpp-news-bounces(a)chrispy.net wrote: -----
> To: CTPP News <ctpp-news(a)chrispy.net>
> From: John-Paul Hopman
> Sent by: <mailto:ctpp-news-bounces@chrispy.net>
ctpp-news-bounces(a)chrispy.net
> Date: 07/31/2012 12:18PM
> Subject: [CTPP] Regional and Statewide Census Geodatabases
>
> We are looking for a pre-configured 2010 Census Geodatabase with both
> linework and data attached for at least the state of Indiana, if not
also
> including the surrounding states. Although all of
the data can be
> downloaded from the Census Bureau on an as needed basis, we would like
a
> more permanent copy in-house for our GIS needs
and publication to our
> regional GIS website.
>
> We are hoping to find something pre-built, rather then downloading and
> compiling everything ourselves. Any assistance in the endeavor is
> appreciated.
>
> John-Paul Hopman
> Michiana Area Council of Gov'ts
>
> _______________________________________________
> ctpp-news mailing list
> <mailto:ctpp-news@ryoko.chrispy.net> ctpp-news(a)ryoko.chrispy.net
> <http://ryoko.chrispy.net/mailman/listinfo/ctpp-news>
http://ryoko.chrispy.net/mailman/listinfo/ctpp-news
>
> _______________________________________________
> ctpp-news mailing list
> <mailto:ctpp-news@ryoko.chrispy.net> ctpp-news(a)ryoko.chrispy.net
> <http://ryoko.chrispy.net/mailman/listinfo/ctpp-news>
http://ryoko.chrispy.net/mailman/listinfo/ctpp-news
15 Oct
15 Oct
7:12 p.m.
A follow up from long past...
For those that are interested, I did a (very) little bit of cleanup on the scripts that
I've used to load ACS data into a postgres database and committed them to github.
These scripts should work fine on either a postgres or a postgis database as they make no
direct reference to the spatial operations. In fact, you'll need to build views
linking the data tables to the geography table and then to the spatial data separately. I
can provide examples of that process if needed.
A couple known issues:
Because the logrecno field is only unique within a single state, this structure will need
some minor modification if you want it to span multiple states.
It takes a bit of time to run (I'd just start it off when you're going to head
home for the evening, and it should be done when you get in the next morning). I started
to switch it to use the psycopg2.copy_from method, but since the data tables basically
have two null value characters "" and "." I'd have had to process
the tables row by row anyways. (see the LoadSequences2 function for the detritus of that
effort.)
I'm sure there are more issues out there, but it's worked for me.
I'm listing it as an Apache2.0 license. Please use it, spread it around, but I'd
love it if you'd let me know you're using it, and a little about what you plan to
do with it. Also, if you fix/improve it, I'll be happy to either give you commit
access, or to do the commit for you.
https://github.com/ucdavis-ice/census-tools
Nate
Nathaniel (Nate) Roth
GIS Programmer
Information Center for the Environment
Department of Environmental Science & Policy
University of California, Davis
1 Shields Ave
Davis, CA 95616
neroth@ucdavis.edu<mailto:neroth@ucdavis.edu>
530-754-6212
From: Roth, Nate
Sent: Wednesday, August 01, 2012 10:40 AM
To: 'ctpp-news(a)ryoko.chrispy.net'
Subject: RE: [CTPP] Regional and Statewide Census Geodatabases
I've written python scripts to process and load ACS data into a PostGIS database, and
know someone who has done similar for the SF1 data. I've been planning on cleaning up
my python for the ACS and make it available under an open source license (probably Apache
2). I'll see if my colleagues who did the SF1 load (and then shared it with me) are
willing to do the same.
Nate
Nathaniel (Nate) Roth
GIS Programmer
Information Center for the Environment
Department of Environmental Science & Policy
University of California, Davis
1 Shields Ave
Davis, CA 95616
neroth@ucdavis.edu<mailto:neroth@ucdavis.edu>
530-754-6212
From: John-Paul Hopman [mailto:jhopman@macog.com]
Sent: Tuesday, July 31, 2012 12:18 PM
To: CTPP News
Subject: Re: [CTPP] Regional and Statewide Census Geodatabases
We have been referred to the demographic profile geodatabases before and made need to take
a second look. However we were hoping to keep everything in a single central geodatabase,
if one already existed, preferably with more then just the basic demographic tables.
Thank-you for the feedback and links though.
John-Paul Hopman
> Geography Division, Census Bureau released
TIGER/Line shapefiles and
> geodatabase files with linework and 2010 Census demographic profile data.
> See our TIGER Products page at http://www.census.gov/geo/www/tiger/ and
> specifically http://www.census.gov/geo/www/tiger/tgrshp2010/2010DP1.html
>
> ______________________________________
> Michael R. Ratcliffe
> Assistant Division Chief, Geocartographic Products and Criteria
> Geography Division
> U.S. Census Bureau
> 4600 Silver Hill Road/ MS-7400
> Washington, DC 20233-7400
> 301-763-8977
> michael.r.ratcliffe@census.gov<mailto:michael.r.ratcliffe@census.gov>
>
> -----ctpp-news-bounces@chrispy.net<mailto:-----ctpp-news-bounces@chrispy.net>
wrote: -----
> To: CTPP News <ctpp-news@chrispy.net<mailto:ctpp-news@chrispy.net>>
> From: John-Paul Hopman
> Sent by: ctpp-news-bounces@chrispy.net<mailto:ctpp-news-bounces@chrispy.net>
> Date: 07/31/2012 12:18PM
> Subject: [CTPP] Regional and Statewide Census Geodatabases
>
> We are looking for a pre-configured 2010 Census Geodatabase with both
> linework and data attached for at least the state of Indiana, if not also
> including the surrounding states. Although all of the data can be
> downloaded from the Census Bureau on an as needed basis, we would like a
> more permanent copy in-house for our GIS needs and publication to our
> regional GIS website.
>
> We are hoping to find something pre-built, rather then downloading and
> compiling everything ourselves. Any assistance in the endeavor is
> appreciated.
>
> John-Paul Hopman
> Michiana Area Council of Gov'ts
>
> _______________________________________________
> ctpp-news mailing list
> ctpp-news@ryoko.chrispy.net<mailto:ctpp-news@ryoko.chrispy.net>
> http://ryoko.chrispy.net/mailman/listinfo/ctpp-news
>
> _______________________________________________
> ctpp-news mailing list
> ctpp-news@ryoko.chrispy.net<mailto:ctpp-news@ryoko.chrispy.net>
> http://ryoko.chrispy.net/mailman/listinfo/ctpp-news
16 Oct
16 Oct
3:18 p.m.
Thanks Nate for the update. I don't know if this has already been
mentioned/addressed, but I thought it might be important to reiterate given the nature of
this listserve and conversation thread . . .
In addition to the issue of the LOGRECNO index being unique within each state (e.g.,
LOGRECNO 000123 in Oregon is not the same as LOGRECNO 000123 for California, or any other
State):
a.) The LOGRECNO field in the SF1 database is NOT the same as the LOGRECNO in the ACS
database (e.g., LOGRECNO 000456 in the SF1 for Oregon is NOT the same geographic unit for
LOGRECNO 000456 in the ACS for Oregon). This is important to know because both SF1 and
ACS call their index fields LOGRECNO, leading to a potentially serious error if one tries
to join the two datasets (obviously, you're not supposed to do that anyway).
b.) The LOGRECNO indices for ACS datasets prior to the 2010 census are NOT comparable
to the indices for datasets that span or cross over the 2010 census (i.e., the ACS
2005-2009 5-year and ACS 2007-2009 3 year do not share the same indexing as ACS 2006-2010
5-year and 2008-2010 3 year, respectively).
I hope I'm not reiterating an obvious point. Thanks again to Nate for the update and
the notice to the list.
Mike Greenwald
Michael J. Greenwald
Senior Transportation Planner
Lane Council of Governments
859 Willamette Street, Suite 500
Eugene, OR 97402
Tel: 541-682-6595
Fax: 541-682-4099
mgreenwald(a)lcog.org
From: ctpp-news-bounces(a)chrispy.net [mailto:ctpp-news-bounces@chrispy.net] On Behalf Of
Roth, Nate
Sent: Monday, October 15, 2012 5:13 PM
To: ctpp-news(a)ryoko.chrispy.net
Subject: Re: [CTPP] Regional and Statewide Census Geodatabases
A follow up from long past...
For those that are interested, I did a (very) little bit of cleanup on the scripts that
I've used to load ACS data into a postgres database and committed them to github.
These scripts should work fine on either a postgres or a postgis database as they make no
direct reference to the spatial operations. In fact, you'll need to build views
linking the data tables to the geography table and then to the spatial data separately. I
can provide examples of that process if needed.
A couple known issues:
Because the logrecno field is only unique within a single state, this structure will need
some minor modification if you want it to span multiple states.
It takes a bit of time to run (I'd just start it off when you're going to head
home for the evening, and it should be done when you get in the next morning). I started
to switch it to use the psycopg2.copy_from method, but since the data tables basically
have two null value characters "" and "." I'd have had to process
the tables row by row anyways. (see the LoadSequences2 function for the detritus of that
effort.)
I'm sure there are more issues out there, but it's worked for me.
I'm listing it as an Apache2.0 license. Please use it, spread it around, but I'd
love it if you'd let me know you're using it, and a little about what you plan to
do with it. Also, if you fix/improve it, I'll be happy to either give you commit
access, or to do the commit for you.
https://github.com/ucdavis-ice/census-tools
Nate
Nathaniel (Nate) Roth
GIS Programmer
Information Center for the Environment
Department of Environmental Science & Policy
University of California, Davis
1 Shields Ave
Davis, CA 95616
neroth@ucdavis.edu<mailto:neroth@ucdavis.edu>
530-754-6212
From: Roth, Nate
Sent: Wednesday, August 01, 2012 10:40 AM
To: 'ctpp-news(a)ryoko.chrispy.net'
Subject: RE: [CTPP] Regional and Statewide Census Geodatabases
I've written python scripts to process and load ACS data into a PostGIS database, and
know someone who has done similar for the SF1 data. I've been planning on cleaning up
my python for the ACS and make it available under an open source license (probably Apache
2). I'll see if my colleagues who did the SF1 load (and then shared it with me) are
willing to do the same.
Nate
Nathaniel (Nate) Roth
GIS Programmer
Information Center for the Environment
Department of Environmental Science & Policy
University of California, Davis
1 Shields Ave
Davis, CA 95616
neroth@ucdavis.edu<mailto:neroth@ucdavis.edu>
530-754-6212
From: John-Paul Hopman [mailto:jhopman@macog.com]
Sent: Tuesday, July 31, 2012 12:18 PM
To: CTPP News
Subject: Re: [CTPP] Regional and Statewide Census Geodatabases
We have been referred to the demographic profile geodatabases before and made need to take
a second look. However we were hoping to keep everything in a single central geodatabase,
if one already existed, preferably with more then just the basic demographic tables.
Thank-you for the feedback and links though.
John-Paul Hopman
> Geography Division, Census Bureau released
TIGER/Line shapefiles and
> geodatabase files with linework and 2010 Census demographic profile data.
> See our TIGER Products page at http://www.census.gov/geo/www/tiger/ and
> specifically http://www.census.gov/geo/www/tiger/tgrshp2010/2010DP1.html
>
> ______________________________________
> Michael R. Ratcliffe
> Assistant Division Chief, Geocartographic Products and Criteria
> Geography Division
> U.S. Census Bureau
> 4600 Silver Hill Road/ MS-7400
> Washington, DC 20233-7400
> 301-763-8977
> michael.r.ratcliffe@census.gov<mailto:michael.r.ratcliffe@census.gov>
>
> -----ctpp-news-bounces@chrispy.net<mailto:-----ctpp-news-bounces@chrispy.net>
wrote: -----
> To: CTPP News <ctpp-news@chrispy.net<mailto:ctpp-news@chrispy.net>>
> From: John-Paul Hopman
> Sent by: ctpp-news-bounces@chrispy.net<mailto:ctpp-news-bounces@chrispy.net>
> Date: 07/31/2012 12:18PM
> Subject: [CTPP] Regional and Statewide Census Geodatabases
>
> We are looking for a pre-configured 2010 Census Geodatabase with both
> linework and data attached for at least the state of Indiana, if not also
> including the surrounding states. Although all of the data can be
> downloaded from the Census Bureau on an as needed basis, we would like a
> more permanent copy in-house for our GIS needs and publication to our
> regional GIS website.
>
> We are hoping to find something pre-built, rather then downloading and
> compiling everything ourselves. Any assistance in the endeavor is
> appreciated.
>
> John-Paul Hopman
> Michiana Area Council of Gov'ts
>
> _______________________________________________
> ctpp-news mailing list
> ctpp-news@ryoko.chrispy.net<mailto:ctpp-news@ryoko.chrispy.net>
> http://ryoko.chrispy.net/mailman/listinfo/ctpp-news
>
> _______________________________________________
> ctpp-news mailing list
> ctpp-news@ryoko.chrispy.net<mailto:ctpp-news@ryoko.chrispy.net>
> http://ryoko.chrispy.net/mailman/listinfo/ctpp-news
31 Jul
31 Jul
11:26 a.m.
I could be wrong, but I think ESRI would be happy to sell you that which you seek. Of
course, if you don't have ESRI products, that may be of no help. If you're
looking for something free, you may be out of luck. Even universities, which used to give
stuff away all of the time, are going to a cost-recovery basis.
Michael D. Golembiewski
Transportation Modeler
BERKS COUNTY PLANNING COMMISSION
633 Court Street FL 14
Reading, PA 19601
Ph: 610 478-6300 ext 6304
Fax: 610 478-6316
e-mail: mgolembiewski(a)countyofberks.com
Web: http://www.co.berks.pa.us/planning
Note: The comments on and attachment to this e-mail are intended only for the use of the
individual or entity to which it is addressed, and may contain information that is
privileged, confidential and exempt from disclosure under applicable law. If the reader
of this message is not the intended recipient, your are hereby notified that any
dissemination, distribution or copying of this communication is strictly prohibited. If
you received this in error, please contact the sender and delete the original message, any
attachment(s) and copies. Thank you for your cooperation.
-----Original Message-----
From: ctpp-news-bounces(a)chrispy.net [mailto:ctpp-news-bounces@chrispy.net] On Behalf Of
John-Paul Hopman
Sent: Tuesday, July 31, 2012 12:02 PM
To: CTPP News
Subject: [CTPP] Regional and Statewide Census Geodatabases
We are looking for a pre-configured 2010 Census Geodatabase with both linework and data
attached for at least the state of Indiana, if not also including the surrounding states.
Although all of the data can be downloaded from the Census Bureau on an as needed basis,
we would like a more permanent copy in-house for our GIS needs and publication to our
regional GIS website.
We are hoping to find something pre-built, rather then downloading and compiling
everything ourselves. Any assistance in the endeavor is appreciated.
John-Paul Hopman
Michiana Area Council of Gov'ts
_______________________________________________
ctpp-news mailing list
ctpp-news(a)ryoko.chrispy.net
http://ryoko.chrispy.net/mailman/listinfo/ctpp-news
2:30 p.m.
Have you checked with your State Data Center?
Their job is basically to do exactly what you are asking.
Mike Baker
GIS/Planner
Erie County Department of Planning
Erie County Courthouse, Room 111
140 West 6th Street | Erie, PA 16501
P (814) 451-6017 | F (814) 451-7000
-----Original Message-----
From: ctpp-news-bounces(a)chrispy.net [mailto:ctpp-news-bounces@chrispy.net]
On Behalf Of John-Paul Hopman
Sent: Tuesday, July 31, 2012 12:02 PM
To: CTPP News
Subject: [CTPP] Regional and Statewide Census Geodatabases
We are looking for a pre-configured 2010 Census Geodatabase with both
linework and data attached for at least the state of Indiana, if not also
including the surrounding states. Although all of the data can be downloaded
from the Census Bureau on an as needed basis, we would like a more permanent
copy in-house for our GIS needs and publication to our regional GIS website.
We are hoping to find something pre-built, rather then downloading and
compiling everything ourselves. Any assistance in the endeavor is
appreciated.
John-Paul Hopman
Michiana Area Council of Gov'ts
_______________________________________________
ctpp-news mailing list
ctpp-news(a)ryoko.chrispy.net
http://ryoko.chrispy.net/mailman/listinfo/ctpp-news
2:55 p.m.
I would ask around your state planning department or data center, or anyone
that has put demographic profiles of your region online. They may be the
ones that have done this.
Are you familiar with the summary file?
http://www2.census.gov/census_2010/04-Summary_File_1/
This has the data and documentation to set up all the Census data for a
state into a series of Access databases (there is too much data to fit into
just one). It will be time consuming to set up but you'd only have to do it
once. Then you could download your shapefiles and join them to the data as
needed.
Mara Kaminowitz, GISP
GIS Analyst
.........................................................................
Baltimore Metropolitan Council
Offices at McHenry Row
1500 Whetstone Way
Suite 300
Baltimore, MD 21230
410-732-0500 ext. 1030
mkaminowitz(a)baltometro.org
www.baltometro.org
-----Original Message-----
From: John-Paul Hopman [mailto:jhopman@macog.com]
Sent: Tuesday, July 31, 2012 12:02 PM
To: CTPP News
Subject: [CTPP] Regional and Statewide Census Geodatabases
We are looking for a pre-configured 2010 Census Geodatabase with both
linework and data attached for at least the state of Indiana, if not also
including the surrounding states. Although all of the data can be downloaded
from the Census Bureau on an as needed basis, we would like a more permanent
copy in-house for our GIS needs and publication to our regional GIS website.
We are hoping to find something pre-built, rather then downloading and
compiling everything ourselves. Any assistance in the endeavor is
appreciated.
John-Paul Hopman
Michiana Area Council of Gov'ts
_______________________________________________
ctpp-news mailing list
ctpp-news(a)ryoko.chrispy.net
http://ryoko.chrispy.net/mailman/listinfo/ctpp-news
4209
days inactive
4286
days old
10 comments
7 participants
participants (7)
-
GREENWALD Michael J -
John-Paul Hopman -
michael.r.ratcliffe＠census.gov -
Mike Baker -
mkaminowitz＠baltometro.org -
Planning Department -
Roth, Nate